Initial Configuration
StoneGate SG-250/SG-200 Quick Start Guide
15
1.2 Select the timezone and press
E
NTER
.
2. Type the host name of the engine machine in the Host name field.
Note –
The host name that you enter here should match the one
defined on the Management Server. (This also applies to the other
properties in the configuration.) You can check this by looking either
at the management GUI itself or by looking at the saved initial
configuration data.
3. In the Password field, enter a password for the root user and re-
enter the password for confirmation in the second field.
4. You will then need to decide whether to enable the SSH daemon
for SSH connections to the engine. By default this feature is
disabled. To enable SSH daemon, highlight the line and press
SPACEBAR
to select it. An asterisk (*) appears to indicate that the
daemon is enabled.
5. Select
Next
and press E
NTER
to continue. The Configure
Network Interfaces screen appears.
3.7.2 Configuring the Network Interfaces
ILLUSTRATION 12 Configure Network Interfaces Screen
▼
To configure the network interfaces:
Note –
It is not necessary (or possible) to add interfaces or device
drivers. This information has been pre-configured to match the device.
1. Assign NIC IDs to the network interfaces by typing the ID
number in the field on front of each network interface.
