If the driver does not confirm the prompt, it will continue
prompting at every standstill until confirmed, as it’s a legal
requirement from 2 February 2022 to confirm a border
crossing.
Settings/Options
The default setting displays the country prompt for
30 seconds, or until the driver confirms or cancels the
reminder. The setting for the function can be changed
with a company or workshop card.
The options are the following:
• OFF (no reminders)
• ON (reminder will be displayed until confirmed or cancelled)
• 30sec (reminder will be displayed for 30 seconds or until
confirmed/cancelled)
• 2min (reminder will be displayed for 2 minutes, or until
confirmed/cancelled)
BORDER CROSSING ASSISTANCE
120 seconds after the GNSS in the tachograph has
detected that the vehicle has crossed a border, the border
cross assistance function will activate.
This will prompt the driver at the first standstill to confirm
the new country.
There is a new option in the SE5000-8 RG to allow
the tachograph to automatically handle all local time
adjustments.
A new menu local time function, available for all users,
is created with three options.
DRIVER TIMER DISPLAY (DTD)
The Driver Timer Display is a new display to assist the
driver in keeping track of the drive and rest time when
outside of the regular DDS calculation.
To activate the timers, press down/up from the main
display until you reach the DTD, then long press OK
until timers are shown.
To deactivate the function, press down/up from main
display until you reach the DTD, then long press OK until
timers reset and –h— is shown instead of digits.
The left side timer will count down a 4-hour and
30-minute drive period since activation, or count down a
45-minute break, or 30-minute break if the previous break
was a 15-minute break.
The right-side timer will count from 00h00 until 99h59.
AUTOMATIC LOCAL TIME ADJUSTMENT (ALTA)
Please note, the display in the above red boxes are in English for all languages in SE5000-8 RG.
Please note, the display in the above red boxes are in English for all languages in SE5000-8 RG.
• OFF – No adjustment or prompts
• DST – Prompts for daylight saving time. This has been
the standard setting in the SE5000
• ALTA – Automatic adjustment of local time according
to time zone and daylight-saving time
