STONEFLY DR365V-2404 Setup Manual Download

Page: 9 / 48

V8.0.3x

Page 8

StoneFly DR365V-2404 Getting Started Guide

Initial Installation

2.1.

Rack Installation Instructions

This section provides information on installing the StoneFly DR365V appliance into a rack or cabinet

with the rails provided. There are a variety of rack/cabinet units on the market, which may mean that the

assembly procedure will differ slightly. You should also refer to the installation instructions that came

with the rack unit you are using.

NOTE:

This rail will fit a rack/cabinet between 26.5" and 36.4" deep.

Identifying the Sections of the Rack Rails

The DR365V appliance package includes one pair of rack rail assemblies in the rack mounting kit. Each

assembly consists of an inner rail that secures the appliance with the chassis and an outer rail that is

attached directly to the rack. The inner rails are etched with “L” (left side) and “R” (right side) to make

them easily distinguishable.

Identifying the Rack Rails

Summary of Contents for DR365V-2404














































Search results

Summary of Contents for DR365V-2404

Reviews:

Related manuals for DR365V-2404

Brands by name

Popular brands

STONEFLY DR365V-2404, Setup Manual

Search results

Summary of Contents for DR365V-2404

Reviews:

Related manuals for DR365V-2404

Brands by name

Popular brands