2
Figure 2. Fireplace Components
Table 1. Fireplace Components
Item
Description
1 Baseplate
2 Sidewall
3 Back
Plate
4 Back
Plate
5 Back
Header
6 Slanted
Side
7 Slanted
Side
8 Front
Header
9-22 Throat
Components
23
Stone Age Chimney Block (sold sepa-
rately)
2.1 Specifications
Table 2: Clearances (See Figure 3)
NA 24, 36 and 48 Fireplace
Item Clearance
Figure
2
Refer-
ence
Backwall 0
Sidewalls
0 to Appliances
18” from Fireplace open-
ing at points in front of
fireplace
Floor: Non
combustible
extending
as follows
20” when hearth is less
than 6” from floor
18” when hearth is greater
than 6” from floor
A
12” Mantle
48” from hearth
B
Top Trim
36” from hearth
C
Side Trim
6” from fireplace opening
D
Front en-
closure
Non combustible from
hearth up 36.” (E-1)
Combustible 36” from
hearth (E-2)
E
Hearth
If the fireplace opening is
6 sq feet or larger, the
hearth shall extend at least
20 inches in front of the
opening and 12 inches
beyond each side. If the
opening is less than 6 sq
feet, the hearth shall ex-
tend at least 16 inches in
front of the opening and 8
inches beyond each side.
Clearance
around
chimney
0” New Age Chimney
Block
2” Metal Pipe chimney
(UL 103 and ULC S604)
F
Chimney
Height
16’ from floor
Note 1
. This Fireplace intended for use with solid wood
fuel or vented gas logs.
CAUTION: When using this appliance, the fire-
place damper must be set in the fully open
position.
Note 2:
this fireplace has not been tested for use with
glass doors.
