All rights reserved by STONE
Technologies
STAD150WT-15 Equipment Manual
Release 01/2019
7
camera, etc
2.3 USB-DEVICE Interface
OTG
interface is USB-DEVICE interface. This interface can only be used
for system programming and ADB debugging.
2.4 LED Interface
There are two LEDs on the STAD150WT-15.The POWER LED is always
on when the display is powered. The USER LED is user defined, which
function can be customized by user.
2.5 Network Interface
The ETH is a 100M adaptive Ethernet interface that is brought out via
RJ45. If you want to use Android's Ethernet function, you need to plug the
network cable into the ETH interface and then turn on the Ethernet
function by setting. The default Ethernet is DHCP-assigned IP. If you want
to manually configure the IP address, you can configure it in the advanced
settings.
2.6 Button
There are two buttons on the STAD150WT-15. Button functions as below:
1. UBOOT button: Normally used when programming
2. USER button: Function reserved
If you need to program img with UBOOT button, please refer to STAD
series User Guide.
