EN
12
TROUBLESHOOTING
Problem
Possible Causes
Solution
The beverage
cooler does not
cool.
The unit may be plugged
in using a different
voltage.
Check if using the wrong
voltage.
The circuit breaker may
be tripped or there is a
blown fuse.
Reset the circuit breaker
or check for a broken fuse.
The beverage
cooler is not cold
enough.
The external environment
may require a higher
setting.
Lower the temperature of
the cooler.
The cooler may be placed
too close to a heat
source.
Keep the cooler away from
direct sunlight or other
heat sources.
There is insufficient
ventilation.
Place the beverage cooler
in an area with proper
ventilation and clearances.
The door is not
completely closed or the
door seal is not working
properly.
Close the door tightly. Do
not open the door
frequently and do not
keep the door open for
extended periods of time.
Replace the seal on the
door if necessary.
The beverage
cooler seems to
make too much
noise.
The unit is not leveled.
Adjust the unit’s feet and
ensure the product is
level.
There is insufficient
ventilation. The unit is
too close to a wall or
another surface.
Allow sufficient clearance
around the unit.
An interior red
light is flashing.
The set temperature is
too low.
Adjust the set
temperature so that it is
higher than the beverage
cooler’s interior
temperature.
