N420529A
EN
• solar radiation and proximity to heat sources
Avoid placing the unit within 1 metre of radio and video
equipment.
Make sure that:
• the installation site of the unit must be chosen with the ut-
most care to guarantee adequate protection from shocks
and consequent damage
• the supporting surface or wall can bear the weight of the
appliance
• the section of floor or wall does not involve load-bearing
construction elements, piping or electrical lines
• the appliance must be installed in a position where it can
be easily serviced
Provide the following:
• a drain and a water supply nearby
• a compliant power supply nearby
• fixing elements suitable for the type of support
Installation minimum distances
The clearance zones for the installation and maintenance of
the appliance are shown in the figure.
Make sure that there is sufficient space to allow the pan-
els to be removed for routine and supplementary mainte-
nance operations.
900
500
30°
Positioning
Preliminary warnings
Make sure that:
• the section of floor or wall does not concern piping or
electrical lines
• the functionality of load-bearing elements is not compro-
mised
• the wall is able to support the weight of the appliance
predisposition to positioning
When positioning the appliance, prepare the wall to house
the formwork.
Component assembly
The formwork arrives disassembled, to be assembled dur-
ing installation.
