Stone Age NA36IND Assembly, Installation And Operation Instructions Download Page 14

 

14

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

 

Stone Age Fireplace Instructions 
Models NA 36/NA36IND 

 

Revised August 2017 

 

Printed in USA

 

 2013-2017, All Rights Reserved 

Stone Age Manufacturing, Inc 

 

LIMITED WARRANTY 

The  products  of  Stone  Age  Manufacturing,  Inc.  (“Stone  Age”)  have 
been carefully manufactured and the components assembled to give the 
customer  a  quality  product.    Stone  Age  warrants  to  the  original  pur-
chaser the materials that it provides to the customer against defects in 
manufacture for a period of twenty-five (25) years from the date of pur-
chase on UL-127 listed fireplaces, for a period of five (5) years from the 
date of purchase on all unlisted fireplaces, fire pits, and other masonry 
components.    Other  accessory  items  or  components  offered,  but  not 
produced by Stone Age Manufacturing, Inc., shall be covered by their 
manufacturer’s  warranties.    This  Limited  Warranty  covers  only  actual 
manufacturing defects in the Stone Age product and does not cover de-
fects or faulty workmanship in the installation of the product or the ma-
sonry or other structure in which it is installed.  Also this warranty does 
not cover items that have been damaged due to over-heating, modifica-
tion,  improper  storage  or  maintenance.    Stone  Age  shall  repair  or  re-
place, at its option, any defective Stone Age product component upon 
receipt of written notice addressed to Stone Age.  This Limited Warran-
ty  covers  only  replacement  of  any  defective  components  within  the 
product itself occurring during the warranty period and does not cover 
the cost of installation or removal from a fixed location.  NO OTHER 
WARRANTIES, EXPRESS OR IMPLIED, ARE MADE, INCLUDING 
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS 
FOR  PARTICULAR  PURPOSES  WHICH  ARE  SPECIFICALLY 
DISCLAIMED.  Stone Age is not liable for damages or injury to per-
sons or property or other incidental or consequential damages.   
 

Stone Age Manufacturing, Inc. 
11107 E. 126

th

 St. N., Collinsville, OK 74021 

WWW.Stoneagefireplaces.com  

Summary of Contents for NA36IND















Reviews: