Maintenance
14
KSV 910
Remove the sweeping roller split shells from the shaft and if re-
quired, clean the running gear box and the shaft.
5.7.2
Assembling the sweeping roller
The split shells of the sweeping roller have square recesses. These
recesses serve for locating the sweeping roller axis.
The two split shells must be put on the rectangular axis of the brush
roller in such a way that the axis fits exactly into the recess of the
split shells.
Then, screw each set of brushes with 3 screws each, till you can no
longer see a gap between the split shells
Summary of Contents for KSV 910
Page 2: ...2 KSV 910 11 06 2010 ...
