Stoltzen SUHM44 HDMI Matrix 4x4
15
Step3.
Set the 4x4 HDMI Matrix Switcher-N
’s network segment to the same as the
router.
Step4.
Set the PC
’s network segment to the original one.
Step5.
Connect the 4x4 HDMI Matrix Switcher-N and PC(s) to the router. In the same
LAN, each PC is able to control the 4x4 HDMI Matrix Switcher-N
asynchronously.
Then it
’s able to control the device via a TCP/IP communication software.
4.3.2 Control 4x4 HDMI Matrix Switcher-N via TCP/IP communication software
(Exampled by TCPUDP software)
1)
Connect a computer with TCPUDP software to 4x4 HDMI Matrix Switcher-N. Open
the TCPUDP software (or any other TCP/IP communication software) and create a
connection, enter the IP address and port of 4x4 HDMI Matrix Switcher-N (default IP:
192.168.0.178, port:8080):
Figure 4- 5 Connect to TCPUDP
2)
Enter commands in designed area to control 4x4 HDMI Matrix Switcher-N, see as
below:
