6
Panel Description
Encoder
Front Panel
2
1
No.
Name
Description
1
Power LED
On:
Encoder is powered on.
Off:
Encoder is powered off.
2
Status LED
On:
Encoder detects valid signal input.
Blinking:
Encoder detects no signal input.
Off:
Encoder is powered off or in the boot process.
Rear Panel
7
6
5
4
3
2
1
No.
Name
Description
1
DC 12V
Connect to the power adapter provided.
2
Audio Out
Connect to an audio decoder such as an amplifier for
audio de-embedding output from HDMI source.
3
HDMI In
Connect to an HDMI source device.
4
RS232
Connect this port to a RS232 device such as a
computer to bi-directionally communicate with a RS232
device at the IP controller or decoder side.
5
LAN (POE)
Connect to an Ethernet Switch for IP streaming output
and device control.
Note:
The encoder and decoder can be powered by
either a PoE-enabled Ethernet switch via this port or
Summary of Contents for APOLLO SA-3000D
Page 1: ...1080P HDMI over IP Encoder Decoder SA 3000E SA 3000D USER MANUAL...
Page 2: ......
Page 19: ......
