Stoll CMS 502 HP+ Operating Instructions Manual Download Page 504

Page: 504 / 562

504

Software - Installation and basic settings

Installing the Stoll operating system

Carrying out restart with machine configuration (Restart and Configuration)

8.4.5 Carrying out restart with machine configuration (Restart

and Configuration)

A restart with the machine configuration is carried out after a gauge conversion

or after attaching special attachments.
Carry out restart with machine configuration:



The machine is switched off.

1. To switch on the machine, set the main switch to 1.



The "BootOkc" window is displayed on the touch screen.

BootOkc window

"BootOkc" window

2. For the automatic warm start within the waiting time tap on the "Restart

and Configuration" key.



The Restart Process gets started.
After the process is shut, the "Language" window is displayed.

3. Select the dialog language and confirm the selection.
4. Proceed to the next window.



The "Machine configuration" window is displayed. The data have been
set at the factory and will not be changed.

5. Proceed to the next window.



The "Machine configuration 2" window is displayed. The data have
been set at the factory and will not be changed.

6. Proceed to the next window.



The "Machine Options" window is displayed. The data is set at the
factory.

Summary of Contents for CMS 502 HP+



















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CMS 502 HP+

Reviews:

Related manuals for CMS 502 HP+

Brands by name

Popular brands

Stoll CMS 502 HP+, Operating Instructions Manual

Search results

Summary of Contents for CMS 502 HP+

Reviews:

Related manuals for CMS 502 HP+

Brands by name

Popular brands