Stocks AG Turbo Jet 10, Operating Instructions Manual

Page: 47 / 50

13
WARRANTY.
The warranty period is 12 months from date of invoice.
If the Turbo Jet or controls or wiring are modified in any way this will void any warranty claim.
Please contact your distributor or dealer for help and advice, or in the event of any problem or
before attempting any repair.
If you still require assistance, please contact Stocks AG directly.
Stocks AG Wizard control system.
REMOTE MOUNTED CUT OUT FINGER SWITCH
The environmentally
sealed switch simply
makes or breaks a connection to the feed motor. It should be mounted to a suitable place
on the implement or linkage of the tractor, and the movement of the implement or linkage
when lifting a machine in or out of work will deflect the spring, and automatically switch the
feed motor off or on accordingly as the circuit is made or broken.
Position the finger switch so that the
tip of the spring comes into contact with the moving
part of the implement or linkage when lifted out of work, and remains deflected until the
implement is lowered back into work. NOTE. Ensure that there is sufficient and positive
deflection on the spring to prevent accidental switching ON or OFF if the implement moves
slightly up or down in work.

The standard wiring as supplied for this switch is when the spring is at rest, the feed motor
will run normally and can be controlled by the cab switch-box, using the manual switch to
turn ON or OFF as required.

When the spring is deflected, and the feed motor is switched ON at the cab switch-box, the
feed motor will stop automatically and will re-start automatically when the spring returns to
rest position. The feed motor will remain stopped for as long as the spring remains
deflected.
NOTE. The area meter also stops when the feed motor stops.

If required, the switch can work in the opposite mode – the 2 wires inside the switch will
need to be connected to the alternative terminals (nearest the
gland nut - inside the switch cover) and it will then stop the
feed motor when at rest, and turn the feed motor on when
deflected. Access the terminals under the switch cover. Refit
the cover correctly.