8
8.1 Emergency Stop instructions
In the case of an emergency always switch of the main power switch on the control panel and isolate
the power supply immediately by disconnecting the power cable
8.2 Maintenance
WARNING
Always ensure the power supply is disconnected before any maintenance work or cleaning of this
machine.
Suitable protective clothing must be worn (See page 6)
DO NOT JET WASH THIS MACHINE
The machine must be checked regularly by the operator for any damage loose bolts or electrical connections,
vibrations, unusual sounds, and to ensure they function correctly.
Before use;
1
. Ensure the machine is securely mounted
2
. Check the power supply
3.
Ensure feed shutters are free to operate before starting work
Daily checks;
1.
Check the disc to motor shaft socket screws (items 5 on page 22) on the lower side of the spinning disc to
ensure they are tight and the spinning disc turns with the motor
2
. Check the stainless disc vanes for any wear or distortion and replace prior to use if necessary.
Vane Kit available if required;- Part number FJ009B (c/w fitting instructions)
3.
Check the feed shutters to ensure they are operating correctly
After each use;
1.
Empty hopper and clean the machine thoroughly
2.
Disconnect the power supply by unplugging the power cable or removing the 25amp fuse in the power
cable.
3.
Store in dry conditions to protect the machine and control system from moisture
WARNING
Always observe all guidelines provided by the product
manufacturer with regards to
handling storage and disposal of products as some may be toxic !
Main Power
On-Off switch
Summary of Contents for FAN JET PRO 130
Page 14: ...14 14 Wiring diagram...
Page 24: ...24 23 FANJETPRO65 130 Parts diagram Issue2 09 14...
Page 28: ...28...
