14
13 Control Panel
A simple and effective manually operated electric control used to instantly start and stop the feed motor at
headlands, and uses a dial control to set the feed motor speed and thus the application rate. It is not linked to
forward speed so once calibrated the operator drives at a consistent forward speed to maintain the rate, or can
manually increase or decrease application rates on the move using the dial.
The control panel
is supplied with self-adhesive Velcro strips to attach the console to a suitable surface
The control console has 2 x toggle switches, and 2 x 12 position rotary dials and which are used to control the
spinning disc and the variable speed 12v feed motor.
A
DISC MOTOR - Power ON/OFF switch, the toggle switch upper position is OFF and the lower position ON
B
DISC MOTOR SPEED CONTROL speed of the disc is controlled by the 12 position rotary dial with maximum
speed achieved at position 12, lower settings used to reduce the disc speed and in turn the spread width.
C
FEED MOTOR ON/OFF switch, the toggle switch upper position is OFF and the lower position ON
D
FEED MOTOR SPEED CONTROL speed of the feed motor controlled by the 12 position rotary dial with
maximum speed achieved at position 12 and by lowering the dial settings reduce the feed motor speed as
required when calibrating
WARNING
Ensure the position and operation of the control panel does not affect the visibility of the
operator or the ability to control the parent machine.
A
B
C
D
Summary of Contents for Fan Jet Mini 130
Page 20: ...20 19 Parts drawing...
Page 23: ...23 22 Notes page...
