Stocks AG FAN JET DUO PLUS TM 130, Original Operating Manual

Page: 29 / 43

29
To setup implement offset:
If the GPS or implement is offset then use the Left/Right offset to centre the Implement to the middle of
your swath
If the actioning part of the implement is forward or reverse of the GPS, use the Back/Front offset to set
the mapping to record where the implement is actioning.
NOTE The GPS offset will impact where the coverage map and Variable Rate Application map are drawn.
It should be kept at the effective working position of the implement. This is where the implement is
actioning i.e. product being applied is making contact with the ground.
EXAMPLE
A. Implement centre is offset to the left.
B. The Implement centre is offset to the rear.
In this example, the product is being thrown behind the implement, making the offset further back to match
where the product is contacting the ground.
29 Setting machine offset