-Instructions Manual-
Introduction
Thank you for purchasing a quality unit. Used carefully and in accordance with the instructions set out below,
your set Lake Spotlight should give you many years of trouble free use. Please read the instructions carefully to
obtain the best results from your purchase.
Your unit features:
•
Solar powered by high quality crystalline solar panel
•
Aluminum alloy housing spotlight
•
No Mains Power
•
Simple wiring
•
Water proof design provides longer life in all weather conditions (IP68 approved)
•
Automatically turns the light on at dusk
•
3 pcs Rechargeable batteries (600mA) included
•
1 light with about 5 meters wire, 4 pcs super bright LED
•
The light can be mounted under water, in-ground, earth and under shade
-anywhere as your want.
Location of the SOLAR CONTROLLER
1)
For the best result, please locate the solar controller in a
position where it can get direct sunlight on the solar
panel, and generally free from cover and shade. (As
shown in figure 1).
2)
Make sure that the solar controller is not going to be affected by any other light source. Otherwise the light
will not illuminate at dusk.
3)
The SOLAR CONTROLLER must be left to charge for 2 sunny days before best results are achieved.
Assembly Instructions
Ground mounting
Carefully remove the UNIT and all the fittings out of the box.
1)
Fix the ground spike on the ‘U’ shape bracket by using
‘bolt’
and
‘gasket’
(as shown in figure 2);
2)
Adjusting the direction of the spotlight head according to your need by
releasing the
‘screw’
, then tight the
‘screw’
after you finish adjusting.
3)
Push the stake directly into the ground (DO NOT hammer the light the
stakes) (as shown in figure 3).
Under water or wall mounting
1)
Find a place for the spotlight;
2)
Drill a hole on the ground or wall;
3)
Fix the light on the place by supplied
‘set screw’
(as shown in figure 4)
4)
Adjusting the light direction by releasing the
‘screw’
then tight it.