Mounting option 2
Mounting option 1
From 200mA supply
MIKE
STOANE
LIGHTING
| EQUIPMENT MANUFACTURE
3-18mm
Threaded
securing ring
Min 5mm
Spring clip
ProtozoaSemiRecessed.pdf 3 16/04/2020 09:59:32
Page 1: ... Company 188910 Protozoa Semi Recessed Installation and Maintenance Instructions IMPORTANT All wiring connections must be made before switching on mains power European Conformity Please retain these instructions for future reference This product should not be disposed of in your general waste Class III Extra Low Voltage Indoor Use Only IP20 MSL Type P 2 9VF 0 6W 200mA ProtozoaSemiRecessed pdf 1 16...
Page 2: ...alified person Installation Check that the mounting surface is suitable for the installation of this fitting A 15mm diameter hole is required for mounting Mounting option 1 Ceiling thickness 3 18mm Insert fitting into the cut out and secure in place with threaded securing ring Mounting option 2 Minimum ceiling thickness 5mm Insert the fitting into the cutout The fitting will be secured in place wi...
Page 3: ... option 2 Mounting option 1 From 200mA supply From 200mA supply MIKE STOANE LIGHTING EQUIPMENT DESIGN MANUFACTURE 3 18mm Threaded securing ring Min 5mm Spring clip ProtozoaSemiRecessed pdf 3 16 04 2020 09 59 32 ...
Page 4: ...ve polarity Positive is marked as RED Incorrect supply or reverse polarity can cause irreparable damage All connections must be made before switching on mains Ensure supply driver and connectors are housed indoors OR in a suitable IP rated enclosure Ensure LEDs are connected in series as shown below to the LED drivers Mains Output LED Driver LED LED LED LED Use suitable connectors ProtozoaSemiRece...
