UM0622
Running the portable media player (PMP)
Doc ID 15260 Rev 1
11/28
Figure 11.
Voice record window
When the ADD icon is selected (see
) the ADD NEW RECORD option only
appears if the corresponding image does not already contain a voice tag. Otherwise, the
message "PIC ALREADY TAGGED" appears instead of "ADD NEW RECORD" (
see figure
above
) and only the list of already recorded voice messages is shown.
Note:
To add a new voice record to an image that has already been voice tagged, you must first
delete the previous voice record from the microSD card.
You can start recording using the on-board microphone. To stop recording, touch "TOUCH
TO STOP". When the recording is stopped, the voice tag information and number of records
are updated. The maximum number of records allowed are equal to the number of images
present on the microSD card.
The voice messages are saved on the microSD card with
.RAW
extensions.
You can change the volume of the voice playback by varying the potentiometer located on
the right underside of the TFT.
Touch the HOME block to return to the home screen.
Previous picture
icon
This icon displays the previous image in normal mode.
Play
icon (screensaver mode)
When touched, this icon starts the screensaver mode of the picture viewer application.
When the mode is started, a message appears on the TFT "Starting screensaver mode, to
exit gently TAP the screen". In this mode, the control bar is not available and the JPEG
images are displayed full screen continuously, as shown in
. To exit the
screensaver mode, tap the screen once with the stylus. The screensaver mode ends and
the next image is displayed in normal mode along with the control bar.
!-V
www.BDTIC.com/ST
