October 2016
DocID029822 Rev 1
1/23
1
UM2119
User manual
Graphical user interface (GUI) for EVAL-L9907-H
Introduction
This document describes the STSW-L9907 the Graphical User Interface (GUI) dedicated to
set and control the EVAL-L9907-H board (3-phase BLDC motor application boards for
L9907) through the SPI protocol, manage the Enable and BST_Dis pins and read the value
from the current sensing section.
The STSW-L9907-H has been developed using Labview
®
and it works with SPC560P-DISP
evaluation board programmed with a dedicated FW (GP-Pictus.elf).