DocID030871 Rev 2
7/14
UM2266
How to load general purpose FW on SPC56M-Discovery
12
4
How to load general purpose FW on SPC56M-
Discovery
To use the L9177A GUI the discovery board SPC56M-Di must be programmed
with the dedicated Firmware (L9177A.elf). This is the procedure to program the SPC56M-
Di using the ST toolchain based on SPC5-UDEDEBG
1.
Start UDE Visual Platform 4.8
2.
If not yet done, create a New Workspace for SPC56M. Click File>New Workspace
Figure 2. UDE: New Workspace creation
3.
Name the new Workspace i.e.
Monaco
and select OPEN.