STMicroelectronics STEVAL-GLA001V1, User Manual

Page: 13 / 46

3 Evaluation board operation with STM32 Nucleo board
3.1 Overview
As shown in Figure 17. Ways to control the STEVAL-GLA001V1 evaluation board , you can either connect the
STEVAL-GLA001V1 to your own board and microcontroller, or to the X-NUCLEO-IHM09M1 interface board for
STM32 Nucleo mounted on a NUCLEO-F030R8 development board, which is in turn connected to a PC via a
USB cable (Type A/Mini A).
Figure 17. Ways to control the STEVAL-GLA001V1 evaluation board
User microcontroller
User board
Nucleo
STEVAL-GLA001V1
board
USB
Provided ribbon cable
Ribbon cable
1st way: use Nucleo board to control the STEVAL-GLA001V1 board
2nd way: use user board with user microcontroller to control the STEVAL-GLA001V1
J202
J203
X-NUCLEO-IHM09M1
interface board
To use the STEVAL-GLA001V1 with the NUCLEO-F030R8 the latter must first be programmed with the firmware
you can download from the
STSW-GLA001V1 web page (for detailed instructions, refer to the firmware user
manual).
After programming the NUCLEO-F030R8, set jumper JP5 to the E5V position.
Figure 18. Connection setup between for STEVAL-GLA001V1 evaluation board, X-NUCLEO-IHM09M1
connector expansion board and NUCLEO-F030R8 development board
UM2304
Evaluation board operation with STM32 Nucleo board
UM2304 - Rev 3
page 13/46