STMicroelectronics SPC58NHADPT302S, User Manual

Page: 10 / 38

5.5 Other Jumpers
Table 5. Other jumpers
Jumper Description Default Position
J29 Testmode settings
Close
(10 KΩ down)
Figure 8. Overview of SPC58NHADPT302S Rev. A
mini module - Top - B2
5.6 Configuration for pin shared between eMMC & SD Card Reader
The following jumpers need to configure the pin shared between eMMC & SD Card Reader set the jumpers
described in the table below.
Table 6. Pin shared between eMMC & SD Card Reader jumpers
Jumper Description Default configuration Position
J26
Data0 – PJ3-EVTO configuration
•
1-2 D1_SD (SD-CARD)
• 2-3 D1_eMM (eMMC)
1-2
(SD-CARD)
Figure 8. Overview of SPC58NHADPT302S Rev. A
mini module - Top - C2
J30
Data1 - PJ4 configuration
•
1-2 D1_SD (SD-CARD)
• 2-3 D1_eMM (eMMC)
1-2
(SD-CARD)
Figure 8. Overview of SPC58NHADPT302S Rev. A
mini module - Top - C1
J32
Data2 - PH5 configuration
•
1-2 D2_SD (SD-CARD)
• 2-3 D2_eMM (eMMC)
1-2
(SD-CARD)
Figure 8. Overview of SPC58NHADPT302S Rev. A
mini module - Top - C1
J35
Data3 - PH6 configuration
•
1-2 D3_SD (SD-CARD)
• 2-3 D3_eMM (eMMC)
1-2
(SD-CARD)
Figure 8. Overview of SPC58NHADPT302S Rev. A
mini module - Top - C1
J28
CLK – PJ2 configuration
•
1-2 CLK_SD (SD-CARD)
• 2-3 CLK_eMM (eMMC)
1-2
(SD-CARD)
Figure 8. Overview of SPC58NHADPT302S Rev. A
mini module - Top - C2
J33
FBCLK - PJ0 configuration
•
1-2 FBCLK_SD (SD-CARD)
• 2-3 FBCLK_eMM (eMMC)
1-2
(SD-CARD)
Figure 8. Overview of SPC58NHADPT302S Rev. A
mini module - Top - C1
J36
CMD - PJ1 configuration
•
1-2 CMD_SD (SD-CARD)
• 2-3 CMD_eMM (eMMC)
1-2
(SD-CARD)
Figure 8. Overview of SPC58NHADPT302S Rev. A
mini module - Top - C2
UM2725
Other Jumpers
UM2725 - Rev 1
page 10/38