10
PUSHROD
CLEANING THE PUSHROD
Spray your Pushrod with Isopropyl Alcohol
and allow it to sit for 10-15 seconds.
Using a microfiber soft cloth buff away
any residue and wipe clean.
Use your paintbrush to remove
excess material from your Pushrod.
For a deeper clean, your Pushrod can be
scrubbed with a nylon brush and dish soap.
REMOVING THE PUSHROD
The faceplate of the Hopper is located where
the handle of the Pushrod meets the Hopper.
Remove the (6) - 5/32” bolts from the front
plate on the Hopper.
Remove the faceplate after bolts have
been remove by pulling the Pushrod out
of the Hopper.
Remove the face of the Pushrod by using a
5/16” Allen Wrench. Face Plate can now be
removed.
ATTACHING THE PUSHROD
Place face plate back onto Pushrod handle.
Attach the face of the Pushrod by screwing in
the 5/16” bolt into the face of the Pushrod.
Place Pushrod back into the Hopper.
Line up the holes in the faceplate with the
holes in the front of the Hopper and screw in
the (6) - 5/32” bolts until tight and secure.
SUPPLIES YOU'LL NEED
5/16” Allen Wrench
5/32” Allen Wrench
Spray bottle of Isopropyl Alcohol
Stain-proof paintbrush
Microfiber soft cloth
Dish soap (optional)
IMPORTANT!
Always unplug machine before disassembly.
Summary of Contents for MINI-REVOLUTION
Page 1: ......
