7
SpeedTech Lights, Inc © 2019
VIRTUE
®
2
DASH LIGHT
Flash Pattern List
•
Steady Burn
•
Variable Speed Left/Right
•
Triple Flash 60 FPM
•
Single Flash 120 FPM
•
Quad Flash 60 FPM
•
Quint Flash Left/Right 150 FPM
•
Quint Flash 90 FPM
•
Quad Flash 120 FPM
•
Quad Flash Left/Right 150 FPM
•
Quint Flash 120 FPM
•
Triple Flash 150 FPM
•
Single Flash Left/Right 120 FPM
•
Single Flash 60 FPM
•
Single Flash 90 FPM
•
Single Flash Left/Right 180 FPM
•
Single Flash 180 FPM
•
Steady Burn
•
Accelerating Single Flash Left/Right
•
Accelerating Single Flash
•
Triple Speed Single Flash Left/Right
•
Steady Burn Right Half. Single Flash Left Half 60 FPM
•
Steady Burn Right Half. Single Flash Left Half 180 FPM
Flash Pattern Shortcuts
•
Hold for 3 seconds to toggle Steady Burn mode.
Synchronization
•
Make sure both units that need to be synced together are powered On and flashing on the same pattern.
•
Connect the Sync cables of the 2 units to each other.
•
Trigger the Flash Pattern changer of both units simultaneously to cycle to the next pattern.
•
Power both units Off and back On to complete the Sync process.
NOTE: It’s best to connect both units to a single control switch when syncing units together.
About Flash Patterns
•
All STL LED products are equipped with a non-volatile memory which will recall the last flash pattern when the Light Bar is turned on.
•
Set the flash pattern by pushing the Flash Pattern button on the Cigarette Lighter Plug to cycle through the various patterns.
•
If you are not using the Cigarette Lighter Plug, follow the wiring diagram to identify the Flash Pattern wire to manually cycle through patterns.
All rights reserved. No part of this Instruction Manual may be reproduced, distributed, transmitted, or otherwise shared in any form or by any means,
including but not limited to photocopying, recording, electronic delivery, .PDF reproduction, or any other means of reproducing all or any part hereof without
the express prior written consent of SpeedTech Lights, Inc, except for non-commercial purposes as permitted by United States copyright law. Customers
of SpeedTech Lights, Inc, may download and print this Instruction Manual for use with products sold to the customer by SpeedTech Lights, Inc. However,
no part of this Instruction Manual may be otherwise or subsequently reproduced, downloaded, disseminated, published, or transferred, in any form or by
any means, except with the prior written consent of SpeedTech Lights, Inc.
