manualshive.com logo in svg

Stirling STR-SSAC12000, Installation Manual, Page: 19 / 24

Share
Download
Stirling STR-SSAC12000 Installation Manual Download Page 19

19

AFTER SALES SUPPORT

1300 886 649

[email protected]

AUS

MODEL: STR-SSAC12000   PRODUCT CODE : 51673   12/2015

Installation (Cont.)

Note:  To ensure you have the correct and most up to date instructions, 

please refer to the wiring attached to the unit purchased. While this 

manual includes wiring diagrams for variable speed air conditioner 

models, we cannot exclude the possibility that the product has been 

improved, which could have caused a change of wiring.

Test Run

• Make sure that pipes and wires are properly connected.
• Make sure that both the liquid side valve and air side valve are completely 

open.

Power source connection
• Connect the plug to an independent power source socket.
• Prepare the remote control.
• Run the air conditioner in COOL mode for 30 minutes or longer.
Performance evaluation
• Test the temperature going into and coming out of the air conditioner. Make 

sure that the air conditioner can achieve a temperature difference between 

the outside air and the air at the indoor outlet of at least 10°C.

Summary of Contents for STR-SSAC12000

























Reviews:

No comments