12
AFTER SALES SUPPORT
1300 886 649
AUS
MODEL: STR-SGC PRODUCT CODE: 56487 06/2017
Installation (Cont.)
Important Clearances
•
Walls or vertical structures
must be at least 200mm away from the
cooktop.
•
Overhanging surfaces:
There must be no overhanging surfaces, and no
rangehood or exhaust system within 650mm above the cooktop.
•
Underneath clearance:
Leave at least a 50mm clearance between the
base of the appliance and any surface.
•
Above oven installation:
If the cooktop is installed above an oven,
the oven must have a built-in cooling fan. The two appliances must be
connected separately, to make it easier to take the appliances out and for
electrical safety.
•
Above cupboard installation:
If the cooktop is installed above a drawer or
cupboard space, and a thermal protection barrier is installed below the base
of the cooktop, the isolating switch must be easily accessible by the user.
•
Unsuitable locations:
The cooktop must NOT be installed directly above
a dishwasher, fridge, freezer, washing machine or clothes dryer, as the
humidity may damage the cooktop electronics.
•
Seek professional advice:
Consult your local building authorities and by-
laws if in doubt regarding installation requirements.
Electrical Connection
•
Isolating switch:
The appliance should be connected to a circuit which
incorporates an isolating switch providing full disconnection from the
power supply.
•
Power cord:
Do not allow electrical fittings or cables to come into contact
with areas on the cooktop that get hot. If the power cord is damaged, it
must be replaced by the manufacturer or a qualified service engineer in
order to avoid a hazard.
•
Electrical impedance:
This appliance must only be connected to an
electricity supply with system impedance of no more than 0.427 ohm. If
necessary, please consult your electricity provider for system impedance
information.
