12
AFTER SALES SUPPORT
1300 886 649
AUS
MODEL: STR-DWSS12 PRODUCT CODE: 700836 06/2020
Installation
DANGER!
Make sure your electrical power is disconnected before installing the
dishwasher. Failure to do so can result in death or electric shock.
IMPORTANT!
All relevant pipes and electrical equipment should be installed by
licensed plumbers, electricians or dishwasher installers. Make sure
to use new water supply and drain hoses; do not use old hoses.
IMPORTANT!
Read this manual to familiarise yourself with all parts and operating
principles. Pay particular attention to the safety instructions.
Unpacking the appliance
• This product has been packaged to protect it against transportation damage.
Unpack the appliance but keep all packaging materials until you have made sure
your new dishwasher is undamaged and in good working order.
• The packaging carton is recyclable. Whenever possible, reuse the carton and
recycle it when disposing of the packaging materials.
• Plastic wrapping can be a suffocation hazard for babies and young children, so
ensure all packaging materials are out of their reach, and dispose of them safely.
• The baskets inside the dishwasher are taped to secure them during transport.
Remove any tape, ties and foam padding from inside the dishwasher.
•
IMPORTANT!
Using the loading instructions on pages 18–23 for guidance, make
sure all parts in the upper and lower baskets are properly installed inside the
dishwasher – you may need to relocate the cup rack for appropriate usage.
• Unwind the cord to its full length and inspect it for damage. Do not use if damaged.
In case of damage, contact our after sales support centre for advice.
Positioning the appliance
• This dishwasher is freestanding. It can also be recessed under a single benchtop.
• Position the dishwasher close to an existing water inlet and drain connection and
make sure there is a power point nearby, or in an adjoining cabinet.
• The back should rest against the wall behind it and the sides along any adjacent
cabinets or walls.
• The dishwasher’s water supply and drain hoses can be positioned either to the
right or left sides to facilitate proper installation.
• Make sure the appliance does not stand on any water hoses or the power cable.
