manualshive.com logo in svg

Stirling STR-18000WIFI, Instruction Manual, Page: 36 / 44

Share
Download
Stirling STR-18000WIFI Instruction Manual Download Page 36

36

AFTER SALES SUPPORT

1300 886 649

[email protected]

AUS

MODEL: STR-18000WIFI   PRODUCT CODE : 62705   10/2018

Other Useful Information

Protection

 

The protective device may trip and stop the appliance in the following situations.

Heating mode

Outdoor air temperature is above 24°C.
Outdoor air temperature is below -15°C.
Room temperature is above 27°C.

Cooling mode

Outdoor air temperature is above 43°C.
Room temperature is below 21°C.

Dry mode

Room temperature is below 18°C.

NOTE: After stopping and restarting the air conditioner, or after changing the 

mode during operation, the system does not restart immediately. This is a 
protection function for the compressor. In such a case, wait for three minutes 
for the system to restart.

End of season maintenance
• Disconnect the automatic switch.
• Clean and replace the filters.
• On a sunny day let the appliance work in ventilation for some hours, so that 

the inside of the unit can dry completely.

Service required!

Switch off the appliance immediately, cut off the power supply and 

call our after sales support line for service in the event of:

• Loud and unusual noises during operation.

• Faulty electronic control board.

• Faulty fuses or switches.

• Spraying water or objects inside the appliance.

• Overheated cables.

• Very strong smell or smoke coming from the appliance.

Maintenance

Periodic maintenance is essential for keeping your air conditioner efficient.

CAUTION! 

Before carrying out any maintenance, disconnect the power supply by 

setting the installation on/off switch to OFF.

Summary of Contents for STR-18000WIFI













































Reviews:

No comments