MODEL: SRH91B | PRODUCT CODE: 54296 | 08/2016
9
Installation Requirements
Typical installation tools required
You’ll most likely require the following tools/equipment (not supplied)
for the installation of your rangehood.
• Electrical drill
• Tape Measure
• Screw-driver
• Spirit Level
If ducting your rangehood, you’ll also most likely require:
• Jig saw
• Ladder
• Duct-tape
• Ducting
Important installation safety notes:
• Always switch the mains power off prior to beginning the installation.
• Stainless steel is very easily damaged during installation. Wherever possible, protect the rangehood with
the cardboard box or plastic wrap during the installation.
• For safety reasons, this Rangehood must be earthed.
• A power point must be located within 1.5m of the power cord exit from the rangehood, and it should be
always accessible to allow isolation from power during cleaning or maintenance.
• A 150mm round ducting adapter is supplied, however all other ducting accessories are not.
• All ducting must comply with building codes and local requirements.
• If you are re-circulating the air, rather than ducting, please ensure that the side outlet grilles are not
obstructed in any way as this will effect the efficiency of the rangehood.
• Ensure that the rangehood is mounted in a level position, both horizontally and vertically. This is essential
to ensure the rangehood operates correctly and prevents grease build up at one end.
Unpacking
During transportation, protective packaging was used to protect the appliance against any damage.
After unpacking, please dispose of all elements of packaging in a way that will not cause damage to the
environment. All materials used for packaging the appliance are environmentally friendly; they are 100%
recyclable and are marked with the appropriate symbol.
WARNING!
All electrical work associated with the installation of this rangehood must be carried out by a
licensed electrician. This rangehood must be correctly installed by a suitably qualified person in strict
accordance with all applicable rules and regulations and following the instructions in this manual.
Do not try to install the rangehood yourself; doing so will expose you to danger and void
the warranty. Improper installation, adjustment, alteration or service can cause injury or damage.
We decline any responsibility for in jury or damage, to persons or property, as a result of
improper installation.
