AFTER SALES SUPPORT
1300 777 137
13
MODEL: IA0978 PRODUCT CODE: 52458 03/2016
Inserting the Dust Bag
NOTE:
Do not use the Backpack Vacuum Cleaner unless the HEPA filter (23), Shake-Out Bag (17) and
Dust Bag (20) are correctly in place.
1. Ensure the Power Cord (9) is disconnected from the power outlet, unplug the Flexible Hose (6) from the
Canister Lid (1) by rotating the Flexible Hose to the left and pulling down.
2. To open the Canister Lid, pull out the bottom of the Canister Lid Tabs (2) on each side of the unit,
release from the Canister Lip Clip and lift the Canister Lid (Fig. 13).
3. Flip the Canister Lid upside down and place your finger beneath the tabs on the Dust Bag holder and
flip upwards to lift the Dust Bag (Fig. 14).
4. Holding the Dust Bag (20) in your hand, slide it carefully through the slots of the Dust Bag Holder and
dispose of the Dust Bag (Fig. 14).
5. Insert a new Dust Bag and ensure the cardboard face of the new bag rests securely in the Dust
Bag Cover guides (Fig. 14).
6. Flip the Dust Bag Holder over, pressing the tab of the Dust Bag Holder until it clicks and locks into
place.
7. Remove the Shake-Out Bag from the Canister Lip and shake out any excess dirt in a large bin or
appropriate area. Ensure the Shake-Out Bag is carefully re-inserted in place (Fig. 15).
8. Put the Canister Lid back on the unit with the Flexible Hose positioned on the right or left, as per
your preference.
9. Lift the Canister Lid Tabs up, hook onto the Canister Lip Clip and click towards the body of the unit to
lock into place.
NOTE:
There is no Dust Bag full indicator. Change the Dust Bag when the suction performace has
decreased.
Instructions (cont)
Fig. 13
Fig. 14
Fig. 15
Shake-Out Bag
Canister Lip
Tabs
