9
After Sales Support
Telephone:
1300 886 649
Email:
Upside down installation
The dryer can be installed upside down (either on the floor or on the wall), if this suits
your setup better. To install it upside down, proceed as follows:
1. Remove the rubber plugs on the top of the unit (see Fig. 1). Then remove the four
legs from the bottom (see Fig. 2).
2. Place the dryer upside down and install the four legs at the bottom (top side of
the original dryer, see Fig. 3). Push the rubber plugs into the holes on the top of
the dryer (bottom of the original dryer, see Fig. 4).
3. There is an additional printed control panel in the accessories bag, place this over
the existing panel (see Fig. 5).
Getting Started: Installation (Cont.)
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5