18
How to Drain Excess Water From Hoses
If the sink is 1000 higher from the floor, the excess water in hoses cannot be drained directly
into the sink. It will be necessary to drain excess water from hoses into a bowl or suitable
container that is held outside and lower than the sink.
Water Outlet
Extension Hose
Syphon Connection
Connect the water drain hose. The drain hose must be correctly fitted to avoid water leaks.
Ensure that the water inlet hose is not kinked or squashed.
If you need a drain hose extension, observe to use a similar drain hose.
It must be no longer than 4 metres; otherwise the cleaning effect of the dishwasher could be reduced.
The waste connection must be at a height of between 50 cm (minimum) and 100 cm (maximum)
from the bottom of the dish. The water drain hose should be fixed by a hose clip.
●
Start of dishwasher
The followings should be checked before starting the dishwasher.
Whether the dishwasher is level and fixed
Whether the inlet valve is opened
Whether there is leakage at the connections of the conducts
Whether the wires are tightly connected
Whether the power is switched on
Whether the inlet and drain hoses are knotted
All packing materials and printings should be taken out from the dishwasher
1
2
3
4
5
6
7
●
Attention
After installation, please put this manual into the bags of printings. The content
of this manual is very helpful to the users.
