9
AFTER SALES SUPPORT
1300 886 649
AUS
MODEL: CFG160 PRODUCT CODE: 700707 03/2020
Getting Started
Before first use
• Unpack the appliance
and keep the original packaging materials in a safe
place. It will help prevent any damage if the product needs to be transported
in the future, and you can use it to store the appliance when it is not in use. In
the event that the carton is to be disposed of, please recycle it where possible.
Plastic wrapping can be a suffocation hazard for babies and young children, so
ensure all packaging materials are out of their reach and disposed of safely.
• Inspect
the cord and plug
for damage or wear before each use. Do not use
the appliance if the appliance or its cord has been damaged or is not working
properly. In case of damage, contact our after sales support centre.
• Read
all instructions
in this manual and make sure you understand all
warnings. To familiarise yourself with all the parts and operating principles of
the coffee grinder, please refer to the Product Overview and Getting Started
sections. Also pay attention to the safety instructions on the previous pages.
• Remove
and wash
the plastic removable parts (coffee bean hopper and lid,
ground coffee container and lid) with a soft cloth or sponge in warm, soapy
water to remove any dust from transport. Rinse and dry thoroughly.
• NOTE:
You may notice a slight stain mark on the inner burr in the grinding
chamber. This is normal and due to factory's coffee grinding test during the
production process. It is unavoidable, and no cause for concern.
Installing and removing the removable parts
Removing the hopper
1. Make sure the machine is unplugged.
2. Press down the RELEASE button to unlock the hopper.
3. With one hand, turn the bean hopper anticlockwise until the unlock
icon is
aligned with the [
|
] marking on the grind selector ring.
4. Lift the bean hopper upwards and remove it from the grinder.
Mounting the hopper
1. Make sure the machine is unplugged.
2. Check and ensure the top part of the conical burr is clear of ground coffee
residues. If not, use the brush provided to clean around the top part of the burr.
3. Align the unlock
icon on the base of the bean hopper with the [
|
] marking on
the grind selector ring.
4. Press down and turn the hopper clockwise until the lock icon is aligned with
the [
|
] marking and the hopper clicks securely in place.
