Converting to two-
thread operation
You can also use your machine solely as a
two-thread machine. To do so, use the two-
thread looper and the left needle only.
1. Switch off the machine and the power point
and pull out the plug.
2. Open the front cover (12) and the free arm
(13).
3. Remove the right needle and the threads for
that needle and for the upper looper (see
also ‘Replacing needles’ on page 34).
4. Take the two-thread converter out of the
accessory compartment (27) of the front
cover.
5. Insert the two-thread converter into the
upper looper (25). (see Figure 1)
6. To do so, insert the hook on the rear end
of the converter into the slot of the upper
looper. (see Figure Point A).
7. Now insert the hook on the front end of the
converter into the eye of the upper looper.
(see Figure Point B).
8. The converter should now be positioned
directly against the upper looper. (see Figure
2)
A
B
1
2
38
AFTER SALES SUPPORT
AUS
1300 884 987
www.medion.com.au
MODEL: MD 18610 PRODUCT CODE: 701495 09/2020
