Assembling your radiator
Remove the radiator and all the accessories from the carton.
1. Turn the
radiator
upside down.
3. Position the
wheel base
assembly
between the
end fins.
5. Tighten the
wing nuts
6. Repeat at the
other end of
the radiator
and turn the
heater the
right way up.
2. Align the U-bolt
supplied with the
wheel base
assembly.
4. Attach them to the
radiator using the U-
bolts and wing nuts
supplied.
7. For SOFR15
(7 fin model):
Fix the front wheel
assembly at the
bottom of the
control panel using
two screws
provided. For the
remaining wheel
base, fix as other
models.
Using your radiator
When using the radiator for the first time a slight odour may be emitted,
this is normal and will disappear with use.
1.
Place the radiator on a flat, stable surface.
2.
Plug into a suitable power outlet ensuring that the cable is not
overstretched or could be accidentally caught.
3.
Turn the thermostat fully clockwise to the maximum setting.
4.
Select the heat output required (3 setting options available)
5.
When the room has reached the required temperature, slowly
turn the thermostat down (anti-clockwise) until the radiator clicks
off.
6.
The radiator will now cycle on and off to maintain the required
temperature.
7.
Should you wish to change the required temperature during use,
then simply adjust the thermostat up (clockwise) or down (anti-
clockwise) accordingly.
NOTE: If the radiator does not come on when the thermostat is on a low
setting, this is normally because the room is warmer than the thermostat
setting and is not a fault.
