Stinson TC12-4884, User Manual

Page: 3 / 18

3 OCT 30, 2020
GENERAL DESCRIPTION
Stinson Arrow Board model no. TC12-4884 conforms to MTO specification for TC12 Arrow Boards
The standard configuration is a vertical mount.
Switches on the cab controller will activate the bar lights, left arrow lights, right arrow lights, and
wing actuators. A beacon switch is also provided as an option.
To activate the Arrow Board, turn the Bar Switch to the UP position. The Bar LEDs will now be
ON and flashing. Left and right Arrows can now be deployed.
To de activate the Arrow Board, turn the bar switch to the OFF position. The wings will return to
the extended position and all LEDs on the Arrow Board will turn off.
See section CAB CONTROLLER for more detail.
The TC12-4884 is typically mounted in a vertical position A Cab Controller and connecting cable
are typically supplied. Standard cable lengths are 35 ft. For custom cable lengths please contact
Stinson Customer Service
Custom racks are available that allow the Arrow Board to mount horizontally. To deploy the
Arrow board in the vertical position, a switch on the Cab Controller operates an actuator, lifting
the Arrow Board to the vertical position.
For wireless communication between the Cab Controller and the Arrow Board, a wireless option
is available.
A Solar option is available. With this option, the Arrow Board is energized by a solar panel. A
separate battery charger system allows the Arrow Board to operate independently from the
truck battery.
For more information on these and other options Contact Stinson Customer Service 1-800-561-
6639 for more information.
Stinson has the capability of custom design engineering if your installation requirements are
unique or special.