8
4. Give a quick pull to the recoil.
5. Allow the unit to warm up and slide the choke off
and set throttle to the desired rpm.
6. Turn engine switch to “Off” position to stop the
engine.
Setting Blade Depth
1.
With the blades off, squeeze depth control lever up
as shown in figure 6.
2.
Rotate the handle forward until the blades touch
the ground. Push forward one additional notch to
set proper depth for most applications and release
lever.
3.
Raise the blades to transport the unit across hard
surfaces.
Setting Seed Flow
1.
Loosen wing nut as shown in figure 7.
2.
Rotate dial from 1
-
11 to increase seed flow. The
higher the number the more seed that will be
delivered.
3.
Tighten wing nut
Note: Different seed types will have different seed flow
rates.
