11
Attaching The Display
Radio & Display Assembly
(Rubber boot not shown)
To attach the display, plug in both display
cables
into the back of the display and
feed the cables under the plastic mounting
bracket and plug into the back of the Radio
Module.
A - Hook the top hook to the top rail
B - Push downward to compress spring
C - Hook the lower hooks on the lower rail
Rubber Boot LVDS Display Cable (Blue USB)
1. Using tin snips or similar, cut the metal back strap included in the
HEIGH10 kit, as shown in FIG. B.
2. Cut the four corners as shown in FIG. C
3. Place the remaining M5 x 10 screw through
the slotted hole on the locking clip and screw
it into the bottom hole on the display mounting
clamp, ensuring the hole on the locking clip
goes over the stud above the screw.
Display Locking Clip
CUT
A
B
C
FIG. B
FIG. C
M5 x 10 (1X)
Lower Hole
(Rubber boot not shown)