8
Grease Points
Grease the 4 bearings on the tine shaft every 50 hours
as shown in Figure 7.
Operation
Starting and Stopping the Engine
1. Slide throttle all the way forward to apply the choke
when Honda engine is cold as shown in figure 8.
Briggs engine is equipped with an auto-choke; allow
60 seconds for unit to warm up before turning off.
2. Give a quick pull to the recoil.
3. Allow the unit to warm up and slide the throttle to
the desired rpm.
4. Slide the throttle all the way back to turn off the
engine as shown in figure 9.
First Time Use
1. Operate the unit at low speed and in a wide open
area.
2. Practice making wide turns first and tighter turns as
you get used to using the machine and the controls.
3. You do not have to raise the tines to make turns.
Tight turns are possible with practice while aerating.
4. Raise the tines to transport the unit across hard
surfaces.
Summary of Contents for Dual-Aer 2400
