Infinea Omni User Manual
Page 11 of 18
UM-00005 Version: A
Figure 6:
Opening the Hinge
4. Before installing the iPad Air device, it is necessary to plug the USB portion of the Lightning
cable into the USB port on the board. The port is located on the same side as the hinge.
Figure 7
identifies the location of the port. When inserting the USB plug into the receptacle, leave enough
length on the Lightning cable to allow the Lightning connector to connect to the iPad Air device
port. Store away the excess cable in the USB pocket.
USB Port
Figure 7:
USB Port
5. If mounting, prepare the mounting surface of the Infinea Omni according to the instructions in the
Assembly Guide for the Wall Mount Bracket accessory.
6. Insert the iPad Air into the unit, as shown in
Figure 8 below
. Ensure the iPad Air is fully inserted
and that the home button on the iPad Air is aligned properly with the access port provided on
the right side of the unit.