stimag STL-H/SW, Instruction Manual

Page: 3 / 24

2. Turn off
Press ON/OFF for 1,5 seconds, it will show
battery level “Pbt80” (means 80% battery
level). After 2 seconds it will show “-OFF-“
and will turn off
3. Zero
Zero function is not allowed when under Tare
state. Press <0> the indicator shows FALL.
If weight is in zero range, 3% of FS and stable
press <0> to go to zero.
4. Tare
When weighing is more than zero and stable
press “Tare”, this weight is kept as tare
weight. The tare indictor on the display will
light on. The indicator will show the net
weight. When the weight is less then zero or
not stable press “Tare” the indicator shows
FALL.
Remove tare weight from the scale, press
“Tare” again to remove tare weight. The tare
indicator on the display will light off.