© stilum GmbH, Gewerbegebiet Larsheck, 56271 Kleinmaischeid • Tel. +49 (0) 2689 92790-0 • All rights and product modifications reserved.
State: 10/04/2015 · S. 3
· MS/TSA
Mounting instructions for swing „vola2“
Item No. 512023402
Diagram 4: Top view „vola2“
Concrete foundations
Size of the minimum space = safety area
The dimensions of the sketches relating to the use of natural
surfaces with impact-absorbing effect.
When using synthetic safety tiles
will reduce the impact surface in the direction of swing
by 500 mm. The minimum space remains
preserved in its entirety.
foundation size, seal the foundation with the safety cover required for the
height of fall indicated. Set up impact-absorbing playground surfacing accor-
ding to EN 1177 HIC 1000.
Recommended surface material: sand, bark mulch, gravel, synth. fall protec-
tion. (Critical drop height ≤ 1200 mm)
7. Screw the chains with the swing seats onto the swing suspension. Readjust
the screws on the swing bars.
8. Do not allow children to use the equipment before the installation has been
finished.
Attention:
If the play equipment has been incompletely installed or partly dis-
mantled when carrying out maintenance and repair work, this may lead to par-
ticular risks of injury for the user. For this reason, make clearly visible that the
equipment shall not be used in such cases.
NOTE:
Play equipment, which contain components made of stainless steel
should not come with „normal“ steel parts in contact. Those steel parts may rub
off and leave small steel particles in combination with moisture brown rust stains.
If such corrosion occur on stainless steel parts, they are fine with an abrasive
(240 grit) to remove.
Please take care when transporting and setting up the fact that the components
are made of stainless steel with no „normal“ steel parts in contact.
2126
2314
600
800
7100
3000
3550
D
E
F
C
1
2
3
4
B
A
3
2
1
5
C
D
4
6
7
8
A
B
Zust.
Änderung
Datum
Datum
Name
Name
Bearb.
Gepr.
Norm
A3
Bl.
Allgemein-
toleranzen
DIN 7168-m
Maßstab 1:50
29.01.2015 Kistinger
vola2
Mindestraum
0120-50-00
Fertigung
E
