© stilum GmbH, Gewerbegebiet Larsheck, D- 56271 Kleinmaischeid • Tel. +49 (0) 2689 92790-0 • All rights and product modifications reserved
Mounting instructions for hanging rings „tendo“
Item-No. 55 1519 401
State: 22.01.2021 p. 3
health
7. Cover the entire impact area with fall protection according to the required
drop height in accordance with EN 1176-1.
Critical drop height: 1900 mm
Recommended surface material:
sand, wood chip, gravel, synth. impact protection.
With a smaller installation depth (special edition) we recommend synthetic
impact protection. In this case, make sure that protruding parts (e.g. screws,
gusset plates) are covered with appropriate fall protection.
8.
Do not allow to use the equipment before the installation has been finished.
Attention:
If the equipment has been incompletely installed or partly dis
-
mantled when carrying out maintenance and repair work, this may lead to
particular risks of injury for the user. For this reason, make clearly visible that
the equipment shall not be used in such cases.
NOTE:
Equipment, which contain components made of stainless steel should
not come with „normal“ steel parts in contact. Those steel parts may rub
off and leave small steel particles in combination with moisture brown rust
stains.If such corrosion occur on stainless steel parts, they are fine with an
abrasive (240 grit) to remove.
Please take care when transporting and setting up the fact that the compo-
nents are made of stainless steel with no „normal“ steel parts in contact.
Diagram 3: Top view
6500
4400
1820
1836
OHNE SCHRIFTLICHE ZUSTIMMUNG DER KAISER GMBH DARF DIESE
TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT, NOCH DRITTEN MITGETEILT ODER
ZUGÄNGLICH GEMACHT WERDEN, NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VER-
WENDET WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
Oberflächen nach
DIN ISO 1302
Reihe 2
Zul. Abweichung
DIN 2768 - mH
1
tendo
Benennung
Gepr.
Werkstoff
Blatt
Datum
Projekt
Gez.
Zuschnitt
Zeichnungsnummer
Rev
Änderung
Datum
1:50
A3
Gewicht
Name
Name
Draufsicht
2128-00-00
Maßstab
Schramm
02.08.18
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
Area of the
minimum space
