© stilum GmbH, Gewerbegebiet Larsheck, 56271 Kleinmaischeid • Tel. +49 (0) 2689 92790-0 • Alle Rechte und Produktmodifikationen vorbehalten
Mounting instructions for multiplay equipment „sura 4b“
Item-No. 51 7530 601
State: 12.08.2019 p. 3
9. Align the play equipment more on the foundations.
Note
: Avoid sagging of the climbing net.
10. Drill holes into all foundations and screw the play equipment into the
foundations with the included heavy-duty dowels.
11. Fill up and compress the holes between the foundation and the foundati-
on hole with the excavation.
12. Seal the foundation with the safety cover required for the height of fall
indicated acc. to EN 1176-1.
Critical drop height: 1500 mm.
Recommended surface material: sand, wood chip, gravel, synth. fall
protection.
13. Do not allow children to use the equipment before the installation has
been finished.
Attention:
If the play equipment has been incompletely installed or partly
dismantled when carrying out maintenance and repair work, this may lead to
particular risks of injury for the user. For this reason, make clearly visible that
the equipment shall not be used in such cases.
STAINLESS STEEL
NOTE:
Play equipment, which contain components made of stainless steel
should not come with „normal“ steel parts in contact. Those steel parts may
rub off and leave small steel particles in combination with moisture brown
rust stains.
MAINTENANCE:
If such corrosion occur on stainless steel parts, they are
fine to remove with an abrasive (240 grit).
Please take care when transporting and setting up the fact that the compo-
nents are made of stainless steel with no „normal“ steel parts in contact.
Diagram 3: Connection pentagon and climbing eye
OHNE SCHRIFTLICHE ZUSTIMMUNG DER KAISER GMBH DARF DIESE
TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT, NOCH DRITTEN MITGETEILT ODER
ZUGÄNGLICH GEMACHT WERDEN, NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VER-
WENDET WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
Oberflächen nach
DIN ISO 1302
Reihe 2
Zul. Abweichung
DIN 2768 - mH
1
quina
Benennung
Gepr.
Werkstoff
Blatt
Datum
Projekt
Gez.
Zuschnitt
Zeichnungsnummer
Rev
Änderung
Datum
1:10
A3
Gewicht
Name
Name
Übersicht
0608-00-00
271.2
Maßstab
x
xx.xx.xx
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
