© stilum GmbH, Gewerbegebiet Larsheck, D-56271 Kleinmaischeid • Tel. +49 (0) 2689 92790-0 • All rights and product modifications reserved
State: 26.08.2021 p. 4
Mounting instructions for multiplay „gravis 2A“
Item-No. 51 5519 421
6. Clean the foundation surface. Connect the platform to the posts acc. to
diagram 1 and 4. Please fasten the parts using the screws including in
the delivery.
7. Place the both towers as shown in diagram 1 and 3 on the foundation
and do a rough aligning. The connection of the wobble bridge and the
connection of the layaway bow should be face to face.
Note: Do not screw the base plates onto the foundations yet!
8. Place the climbing wall as shown in diagram 1 and 2 in the middle bet-
ween the two towers.
Attention: Safe the climbing wall during the whole construction of
the multiplay equipment against overturning.
9. Connect the layaway bow with the tower and the climbing wall at the
intended locations acc. to the diagram 1, 5c and 6a using the screws
including in the delivery.
10. Mount the wobble bridge with the tower and the climbing wall at the inten-
ded locations acc. to the diagram 1, 5d and 6c. Please fasten the parts
using the shackles including in the delivery.
11. Connect the slide with the tower at the intended locations acc. to the
diagram 1 and 5b. Please fasten the parts using the screws including in
the delivery (see diagram 6b).
12. Connect the climbing balls (diagram 5e) and the parallel bars slide (dia-
gram 5f) with the tower at the intended locations acc. to diagram 1 in the
same way as the layaway bow (shown in diagram 6a). Please fasten the
parts using the screws including in the delivery.
13. Place the base plate of the climbing net onto the foundation and connect
the climbing net (diagram 5a) with the tower at the intended locations
acc. to the diagram 1 and 6c. Please fasten the parts using the shackles
included in the delivery.
Diagram 4: Platform
connection post / tower
OHNE SCHRIFTLICHE ZUSTIMMUNG DER KAISER GMBH DARF DIESE
TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT, NOCH DRITTEN MITGETEILT ODER
ZUGÄNGLICH GEMACHT WERDEN, NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VER-
WENDET WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
Oberflächen nach
DIN ISO 1302
Reihe 2
Zul. Abweichung
DIN 2768 - mH
1
gravis
Benennung
Gepr.
Werkstoff
Blatt
Datum
Projekt
Gez.
Zuschnitt
Zeichnungsnummer
Rev
Änderung
Datum
1:20
A3
Gewicht
Name
Name
Kugelaufstieg
1001-13-00
27.91
Maßstab
Schramm
02.11.18
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
