© stilum GmbH, Gewerbegebiet Larsheck, 56271 Kleinmaischeid • Tel. +49 (0) 2689 92790-0 • All rights and product modifications reserved.
Mounting instructions for slackline „lixus“ modular unit 1
Item-No. 51 6510 402
state: 03.01.2018 p. 4
3600
8600
Blatt:
Projekt:
Artikelnummer:
ZG-NR:
BENENNUNG:
OHNE SCHRIFTLICHE ZUSTIMMUNG DER C KAISER GMBH DARF DIESE TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT
NOCH DRITTEN MITGETEILT ODER ZUGÄNGLICH GEMACHT WERDEN NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VERWENDET
WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
FREIG:
GEPR:
GEZ
:
DATUM:
NAME:
WERKSTOFF
MAßSTAB:
OBERFLAECHEN NACH
DIN ISO 1302 REIHE 2
ZUL. ABWEICHUNG
DIN 2768 - mH
+0,3
-0,3
WERKSTUECKKANTEN
NACH DIN 6784
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
A3
1
0307-00-00
551515401
8600x3600
Fertigung:
Mattheis
Gewicht:
139007.3
Slackline 1A
Zust.
Änderung
Name
Abmaße:
Zuschnitt:
Draufsicht
Datum
18.01.17
Diagram 3: Top view „lixus“
9. Critical drop height: 350 mm
Recommended surface material: optional
The impact area must be free of any sharp-edged or dangerously protruding
parts and must be installed in such a way that it does not create a trap.
10. Do not allow children to use the equipment before the installation has been
finished.
11.
During the first days of usage, it is possible that the rope elongates. A few
days after the first use, check the ropes and if necessary re-stress the rope.
Note:
We suggest to elongate the rope during winter with month below free-
zing point to prevent extra burdens to the foundations and the platforms.
Maximum load: 120 kg
Attention:
If the play equipment has been incompletely installed or partly dis-
mantled when carrying out maintenance and repair work, this may lead to par-
ticular risks of injury for the user. For this reason, make clearly visible that the
equipment shall not be used in such cases.
NOTE:
Play equipment, which contain components made of stainless steel
should not come with „normal“ steel parts in contact. Those steel parts may rub
off and leave small steel particles in combination with moisture brown rust stains.
If such corrosion occur on stainless steel parts, they are fine with an abrasive
(240 grit) to remove.
