© stilum GmbH, Gewerbegebiet Larsheck, 56271 Kleinmaischeid • Tel. +49 (0) 2689 92790-0 • All rights and product modifications reserved.
Mounting instructions for „Crosstrainer Stepper“
Item-No. 55 1012 401
State: 14/11/2014 · S. 3
· MSö
6. Do not allow to use the equipment before the installation has been finished.
Attention:
If the fitness equipment has been incompletely installed or partly
dismantled when carrying out maintenance and repair work, this may lead to
particular risks of injury for the user. For this reason, make clearly visible that
the equipment shall not be used in such cases.
7. NOTE:
Fitness equipment, which contain components made of stainless
steel should not come with „normal“ steel parts in contact. Those steel parts
may rub off and leave small steel particles in combination with moisture
brown rust stains.If such corrosion occur on stainless steel parts, they are
fine with an abrasive (240 grit) to remove.
Please take care when transporting and setting up the fact that the compo-
nents are made of stainless steel with no „normal“ steel parts in contact.
8. The fitness information sign has to be arranged outside of the minimum zone
because of the risk of injury.
Diagram 3: Top view „Crosstrainer Stepper“
1550
800
3550
3000
Zust.
Änderung
Datum
Datum
Name
Name
Bearb.
Gepr.
Norm
A4
Bl.
Allgemein-
toleranzen
DIN 7168-m
Maßstab 1:25
27.11.2013
Utikal
Stepper
Mindestfreiraum
Crosstrainer Stepper
Fertigung
Extent of the
minimum zone =
safety area
