User Manual (U.S.)
2018.07.20
v.2
Page
|
9
*No
te:
Im
a
g
es
in
th
e
Lif
to
n
Tr
io
Us
er
M
a
n
u
a
l, m
a
y d
ep
ict th
e
D
u
o
o
r Tr
io
. M
a
n
y p
a
rts
a
re
u
n
iver
sa
l wi
th
th
e
ex
ce
p
ti
o
n
to
t
h
e
Fo
o
tp
rin
t a
n
d
L
ift
Ca
b
Si
ze
/S
h
a
p
e.
Travelling in the Lift
1. When entering the lift, the lights come on automatically. Stand
(or sit) in the lift facing the opening.
2. Close the door and make sure that you are not obstructing the
safety light curtain across the lift entrance. If obstructed, the lift
will not travel, and a buzzing sound will indicate continued
obstruction of the safety light curtain. If you are in the entrance
area, there will also be a white light illuminated
indicating a light curtain obstruction.
3. If the load is greater than specified for this lift (230kg or 500lb)
the overload light will be illuminated. The lift will not move until
the weight is reduced.
4. Ensure any passengers or items travelling with you are fully
contained within lift car.
5. Select the desired direction (see image of control panel on
page 10). Depress and hold the appropriate button for travelling
up or down. The lift will move while the button is depressed.
6. Hold the button down until the lift stops at its destination.
7. If you see an unsafe situation, release the button and either
wait until it is safe to continue or return to the floor from which
you came.
Calling the Lift
You can position the two remote controls anywhere around your
home and these allow you to control the lift, and to call it
when it's parked on the other level. The remote control can be
used to move the lift to the desired floor.
1. If possible, first check to make sure that nobody is inside the
lift trying to operate it from within.
2. Press the call button on the remote control and keep it pressed
until the lift has come to a stop on the desired floor. Please note:
you can stop the lift at any time by releasing the button.
3. If the lift encounters obstruction when being called either up
or down, it will stop. If this occurs, reverse the direction the lift
is travelling in and return it to the starting point. Clear the
obstruction, and as soon as the obstacle has been removed from
the operation area, the lift will continue its journey.
