STILLE imagiQ2, User Manual, Page: 15 / 28

15
Stille imagiQ2
TM
user manual Handling
n
Saf
et
y Inf
or
mation
2. On
Swiches the operating table on, indicated with green LED next to the button.
Basic settings
3. Parked table
The table is parked and cannot be moved. When the table is being parked the table is lowered down onto the
floor and after approximately 15 seconds the green LED next to the button will light up.
In this position all the table movements except the guide wheel can be activated.
4. Unparked table
The table is on wheels and can be moved.
When the table is not parked, the table is on wheels. In this position the lengthways tilting, column up/ down and
parked table can be activated. When unparking the table a red LED will flash for approximately 15 seconds. To
indicate a completed unparking, the red LED will be constantly lit.
If table is loaded and uncentered,unparking is not allowed, center the table and unlock. If an uncentered table
is loaded a constant beep is heard. Centre the table in order to clear the alert. see page 11 Safe position.
The table is more stable when parked. Always park the table when it’s not being transported.
If power is cut off during the parking/unparking sequence, the wheels may be left ”halfway out” and could be
damaged in the event of a collision, for example with a threshold.
If any Trendelenburg functions are activated during parking/ un-parking, the parking/un-parking sequence
will temporarily be interrupted.
Unpark table and switch power off before moving the table. This to avoid ”unwanted movements” of the
table.
If tilt movement is called for (lateral tilt or return to zero) the table will automatically be parked.
5 - 6. Setting of head-end
Select head-end by pressing one of the head-end buttons, indicated by green LED. The setting changes the
direction of movement for the following functions:
Lateral tilt.
Longitudinal tilt (Trendelenburg) Quick-Trend.
Make sure that the head-end setting corresponds to the actual patient orientation.